Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
C-Flex Tubing, Saint Gobain, 374, TPE, thermoplastic elastomer, weldable, 50ft
AVANTOR MASTERFLEX (VWR LLC) Catalyst Stopped Tubing Assembly, Norprene Food, 1.6 mm ID, 12 pk
Start pumping with little effort - preconfigured Links for quick and easy setup
Microsolv Technology Corporation Tubing, PTFE, 1.70" ID, 2mm OD, Low Pressure. 5 Meter Roll. 1 EA.
This MicroSolv, Thin Walled, PTFE ( Polytetrafluoroethylene ) Tubing is extruded from virgin PTFE, manufactured exclusively by DuPont. We do not add any additives to the original PTFE material, except for particles for color coding. This tubing is used widely in all low-pressure, laboratory applications including before and after an HPLC Pump such as with Mobile Phase Delivery and Solvent Waste Systems. Since PTFE tubing contains "micro-pores" in the tubing wall, which allows a quick air exchange, consideration for for use with degassed and oxygen-sensitive solvents is needed. Internal and Outer Dimensional Tolerance: +/- 0.20mm Color: Natural PTFE, Translucent ID: 1.70mmPressure rating: 150 psi.
Cole-Parmer TPV Pharma Grade Tubing, 1/4" ID x 7/16" OD; 50 Ft
Use the biocompatible TPV tubing for peristaltic pumping, filling, and fluid transfer applications. This flexible opaque tubing offers excellent pump performance while providing great chemical resistance, making it a great alternative to silicone tubing.
TPV tubing does not contain BPA, phthalates, PVC, or peroxide that can leach out into the fluid, making it perfect for pharmaceutical, laboratory, and diagnostic applications. For an added level of particle control, a liner is placed between the tubing package and the box.
Electron Microscopy Sciences Vacuum Pick-Up 9/16" Suction Cup
Accessory for use with the Vacuum Pick Up System.
Microsolv Technology Corporation Tubing, Stainless Steel, Pre-Cut, 0.005" ID, 1/16" OD, HPLC Grade, Red Band, 30cm Long. 1 EA.
Properly cutting tubing is one of the most difficult tasks in a chromatography laboratory. These Pre-Cut Stainless Steel Tubes are the perfect solution.Welded and Annealed, the ends are cut using Electronic Discharge ( EDC ) Technique to achieve square and burr free zero dead volume connections. They are tested according to EN 10204/3.1B. The Red Band is a color code for.005" ID. Internal and Outer Dimension Tolerances: +/- 0.05mm.
AVANTOR MASTERFLEX (VWR LLC) Bev-A-Line B-5 IV Tubing, 1/8""ID x 1/4""OD, 50 ft/pack
Applications: Safe for food, beverage, drug, lab, and general use¿yet much more affordable than PTFE tubing. Safe for most alcohols; avoid use with strong solvents. Characteristics: Polyethylene liner with ethyl vinyl acetate shell. No plasticizers. Nontoxic and nonhemolytic. Heat-bondable. Translucent. Certification: Resin is FDA-compliant (liner: 21 CFR 177.1520; shell 21 CFR 177.1350). Meets USP Class VI, USDA, and National Formulary requirements. Temperature range: ¿30 to 160¿F (¿51 to 71¿C) Sterilize: With ethylene oxide or dry heat.
AVANTOR MASTERFLEX (VWR LLC) MSTRFLX B/T PLTM CURED SILICN
Masterflex B/T Platinum Cured Silicone 1IN ID
AVANTOR MASTERFLEX (VWR LLC) 2-STP TYGN E-LFL 1.37MMID 12PK
Masterflex Ismatec Pump Tubing, 2-Stop, Tygon S3™ E-LFL, 1.37 mm ID; 12/PK, Avantor
AVANTOR MASTERFLEX (VWR LLC) TUBING VITON 2-STOP 15 1.25FT
Masterflex L/S 2-Stop High-Performance Precision Pump Tubing, FDA-Compliant Viton, L/S 15; 4/PK, Avantor